Contact us: +44 (0) 161 430 4000
email: info@bonutengineering.co.uk

Dereve Relief Valves
 
Brass Relief Valves

Product Links:

Brass Relief Valves

Stainless Steel Relief Valves

Pressure Regulators

Wind Up Door Bells

Water Savers

Fusible Plugs


Dereve offer a large range of brass relief valves and our valves can be fitted with a variety of seat materials to suit every requirement.

Pressure ranges available are from 0.5 - 27.6 Bar

As with all of our relief valves our brass range of relief valves are PED 97/23 EC approved and CE marked.

Below are the valves we currently offer, however if you do not see the valve you are looking for we will happily discuss manufacturing valves to meet your exact requirements.





DF65 BRASS SIDE OUTLET c/w Sealed Cover
SIZES 3/8",1/2",3/4", & 1" BSPT
Soft valve washers for 'bubble tight' seal.
High lift for High Performance to BS6759 PARTS 1 & 2:1984
Side Outlet discharge
Pressure Range 0.5 bar G to 27.6 bar G
Suitable for water, oil, air and inert gases
Temperature Range -40 C to +180 C
Main components Brass, Springs in stainless steel
See DF65HP for higher pressures
AVAILABLE DEGREASED FOR OXYGEN SERVICE

For a full data sheet please click here






DF61 BRASS OPEN DISCHARGE c/w Easing Gear
SIZES > 3/8",1/2",3/4", & 1" BSPT
Soft valve washers for 'bubble tight' seal.
High lift for High Performance to BS6759 PART 2:1984
Atmospheric discharge
Pressure Range > 0.5 bar G to 27.6 bar G
Suitable for air and inert gases
Temperature Range > -40 C to +180 C
Main components Brass, Springs in stainless steel
AVAILABLE DEGREASED FOR OXYGEN SERVICE

For a full data sheet please click here

 





DF60 BRASS OPEN DISCHARGE c/w Easing Gear
SIZES > 1/4" BSPT
Soft valve washers for 'bubble tight' seal.
High lift for High Performance to BS6759 PART 2:1984
Atmospheric discharge
Pressure Range > 0.5 bar G to 27.6 bar G
Suitable for air and inert gases
Temperature Range > -40 C to +180 C
Main components Brass, Springs in stainless steel
AVAILABLE DEGREASED FOR OXYGEN SERVICE

For a full data sheet please click here

 

 

iso 9001 : 2000Dereve are registered to the ISO 9001:2008 Quality standard.

All of our relief valves are manufactured under and approved to the European Pressure Directive: PED No. 97\23\EC.

 

For more information on any of the above relief valves please contact:

Tel: +44 (0) 161 430 4000
Fax: +44 (0) 161 494 1461
Email:
info@bonutengineering.co.uk

 

Brass Relief Valves|Stainless Steel Relief Valves|Pressure Regulators|Wind Up Door Bells|Water Savers